Filter press
The filter press JH-WMF-60100 is a solid design with Iranian technology and has a strong solid frame and skeleton, which is suitable for mineral and chemical applications and of course the drilling waste management system. The system used in this device is based on the Chamber method and physical filtering. This device is specially designed and produced for the first time in Iran to be used in the field of drilling waste control. The raw materials used in this equipment are of the highest quality level and approved by reputable organizations such as European CE. The purification power of this device varies depending on the type of fluid and the amount of suspended solids. In the field test conducted in Azadegan area, the output of this device was 250 gallons per minute (GPM). The maximum theoretical power of this device is up to 400 gallons per minute (GPM). This machine is made in semi-automatic and fully automatic models, in semi-automatic mode, the pages are moved manually and the check opening and closing system is done automatically. This device has a 7.5 kW three-phase electric motor that is controlled by an electrical panel. The coating of the device is made of polyurethane, resistant to ultraviolet rays, and completely suitable for the environmental conditions and harsh conditions of drilling machines. This three-layer coating benefits from polyurethane paint in the middle layer and Zinc Rich Epoxy coating in the first layer. Before applying any coating, the machine is de-rusted and sub-surfaced by the sandblasting system and by the sandblaster. In the process of making this device, raw materials of international quality and with the current European CE standards have been used, which guarantees the quality of the product.
An industrial filter press is a tool used in separation processes, specifically to separate solids and liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered solids, and allows easy cleaning or replacement of the filter media.
Filter presses cannot be operated in a continuous process but can offer very high performance, particularly when low residual liquid in the solid is desired.
Industrial filter press is a tool used in separation processes, especially for separating solids and liquids. The device stacks many filter elements and allows the filter to be easily opened to remove the filtered solids and allow for easy cleaning or replacement of the filter media.
The filter press cannot operate in a continuous process, but it can provide very high performance, especially when low residual liquid in the solid is desired.
The filter press JH-WMF-60100 is a solid design with Iranian technology and has a strong solid frame and skeleton, which is suitable for mineral and chemical applications and of course the drilling waste management system. The system used in this device is based on the Chamber method and physical filtering. This device is specially designed and produced for the first time in Iran to be used in the field of drilling waste control. The raw materials used in this equipment are of the highest quality level and approved by reputable organizations such as European CE. The purification power of this device varies depending on the type of fluid and the amount of suspended solids. In a field test conducted in Azadegan area, the output of this device was 250 gallons per minute (GPM). The maximum theoretical power of this device is up to 400 gallons per minute (GPM). This machine is made in semi-automatic and fully automatic models, in semi-automatic mode, the pages are moved manually and the check opening and closing system is done automatically. This device has a 7.5 kilowatt three-phase electric motor that is controlled by an electrical panel. The cover of the device is made of polyurethane, resistant to ultraviolet rays and completely suitable for the environmental conditions and harsh conditions of drilling machines. This three-layer coating benefits from polyurethane paint in the middle layer and Zinc Rich Epoxy coating in the first layer. Before applying any coating, the device is de-rusted and sub-surfaced by the sandblasting system and by the sandblaster. In the process of making this device, raw materials of international quality and with current European CE standards have been used, which guarantees the quality of the product.
Sales representative of prefabricated parts (sandwich panel)
Considering the special characteristics of sandwich panels, they are very suitable insulators against heat, sound and humidity, their beauty, speed in production and assembly, lightness and variety of production have attracted the attention of many experts and civil and industrial engineers, and hence to It is safe to say that this product can be implemented in most national projects. The sheets are made of special steel with Alozinc coating (aluminum zinc alloy) along with polyurethane foam.
Sandwich wall panel:
Wall sandwich panel is a type of ready-made building material that consists of two layers of sheets and foam is injected between them, which is used to cover walls and facades.
Roof sandwich panel:
The roof sandwich panel is used to cover the roofs of industrial sheds, agriculture, warehouses, factories and other roofs.
Cold storage sandwich panel:
Sandwich panel cold storage is a closed and enclosed space whose temperature and humidity are carefully and continuously controlled.
Sandwich panel isolation room:
Sandwich panels for clean rooms are the most unique modern building materials and are the main choice of many designers and builders of clean rooms.
